|
VERTICAL-LIFT
DRUM POURERS
Model 515-114
Scale Equipped: Weigh drum while pouring
Single-Stage Drum Pourer
Pour up to 60" High
MODEL 510 to 525
SERIES
|
| Model 515 and 525 Series
HAVE BUILT-IN WEIGHING CAPABILITY
|
 DRUM
HANDLERS
ON WHEELS TO MOVE,
POUR, and WEIGH
Lift, tilt and drain drum contents with ease
Know weight of what you have poured!
Hydraulic lift system and tilt control make
it simple to raise and tilt heavy drums
Digital indicator keeps you informed of drum
weight
Weigh even while pouring into vat, hopper,
mixer or other container at any pouring angle or height
Capacity: 800 Lb. (363 kg)
MODEL 525
Series is the 2-Stage version with lifting capability to 106"
MODEL 515
Series is the
Single-Stage version capable of lifting drums 60" from the floor
NOTE: Model 520 and 510
Series
are NON-scale equipped versions
|
ACCURATE BATCHING
BY WEIGHT |
 Morse engineered the structure of
the drum handler to sum the downward components of force and factor out the variation of
forces caused by tilting the drum to pour its contents. This design, combined with the
digital electronic instrument provides measurement to 0.1 Lb. (0.05 kg) while handling
drums up to 800 LB (363 kg) with accuracy of +/-0.2 % of displayed weight.
|
INTRINSICALLY SAFE
ELECTRONICS
|
Scale indicator is Ultra Low Power Intensity
(ULPI) Instrument
Factory Mutual approved for many hazardous
areas
Intrinsically safe weighing system may be
used in many hazard areas where ordinary electric powered equipment would be prohibited
Spark resistant parts such as monel metal
drum holder bands are optional
Charger for the scale battery is not for use
in the hazard area
Recharge the battery outside the hazard area
Choose hand pump or air motor driven pumps
to avoid spark hazards
AC motors and battery powered hydraulics are
available for non-hazardous areas
|
POWER OPTIONS |
All Morse scale equipped
drum handlers are available with a choice of:
Option 110 - AC motor
powered hydraulic lift & tilt:
add suffix -110 to model #
Option 114 - Air motor
powered hydraulic lift & tilt:
add suffix -114 to model #
Option 115 - 12V DC
powered hydraulic lift and tilt
(includes 12V battery & charger):
add suffix -115 to model #
Manual lift and tilt version:
- Hand pump for lift
- Hand crank or pull chain for tilt
|