ATTACHMENTS FOR LIFT TRUCKS
FOR MOVING and POURING DRUMS

MORSE
 Extra Quality Features:

• High strength lifting components
  
  

• Drums are secured by high strength, wear resistant alloy chain
  
  

• Chain tightening ratchet and spring loaded pawl assembly has oversize, specially contoured teeth and redundant safety features for reliability and ease of use 

MODEL 285 SERIES 
FORK LIFT-KARRIERS

• Lift, Transport, Raise and Tilt Loaded Drums
• Several versions are available
• Capacities of 800 Lb. to 2,000 Lb. (363 - 909 kg)
• Converts your fork truck into a drum handler
• Operator can easily raise, transport, tilt and drain drums
• 10' pull-chain loop allows control from the driver's seat
• Simple to mount on you forks
• No tools are needed
• No power connections
• No truck modifications

• 30:1 ratio tilt gears
• Capacity:  800 Lb. (363 kg) Full 55 gallon steel drums
                  500 Lb. (227 kg) Half-full drums
• Fork openings are 24½" apart and are 2½" high by 6½" wide
• Model 285A-M with spark resistant parts also available

MODEL 285A-HD (Heavy-Duty)

• 60:1 ratio tilt gears for higher capacity and finer control
• Capacity:  1500 Lb. (682 kg) Full 55 gallon steel drums
                  800 Lb. (363 kg) Half-full drums
• Fork openings are 24½" apart and are 2½" high by 6½" wide
• Model 285AM-HD with spark resistant parts also available

MODEL 285A-GR (Gear Reducer)

• Has a worm gear speed reducer and is built to handle greater pay load
• Capacity:  2,000 Lb. (909 kg) Full 55 gallon steel drums
                  1,000 Lb. (454 kg) Half-full drums
• Fork openings are 24½" apart and are 2½" high by 6½" wide
• Model 285AM-GR with spark resistant parts also available

MODEL 285A-BP
Battery Powered Karrier

• Decreases effort & Increases productivity
• Has push buttons for 180° controlled tilt
• Drum holder has the same alloy steel cinch chain and ratchet tightener as on Model 285A-HD
• Tilt function is powered by a rechargeable 12V battery
• Battery and a charger provided with unit
• Capacity:  1,200 Lb. (545 kg) Full 55 gallon steel drums
                  600 Lb. (272 kg) Half-full drums

MODEL 285A-HDPS

• Handles 55 gallon (210 liter) plastic or steel drums in size range of 22 to 23½" diameter by 34-39" tall
• Bracket on the drum holder has an el-shaped foot to support the drum from the bottom
• Hold-down bracket to trap drum from the top
• Capacity:  900 Lb. (409 kg) Full drums
                  450 Lb. (204 kg) Half-full drums
• Fork openings are 24½" apart and are 2½" high by 6½" wide

Tilt Control Options

• Battery Powered tilt control on Model 285A-BP
• Chain Wheel
• Self-Stopping hand crank and gear covers in place of chain wheel. Add -X01 to model number.
• Hand crank (simple type, not self-stopping) and gear covers in place of chain wheel. Add -X02 to model number.
• Hand wheel and gear covers in place of chain wheel.
  Add -X03 to model number.

MODEL 284 - FORK HOOK

• Slides right onto the fork to enable the use of Morse below-the-hook drum lifters
• Fork openings are 5-1/2" X 1-9/16"
• Capacity:  2,000 Lb. (909 kg)