|
| |
| Model 300, and 305 Series
END-OVER-END TUMBLERS
MIX, BLEND, TUMBLE CLOSED
DRUMS
MORSE "ROTATORS"
|
|
|
Turning the drum end over end
provides more aggressive mixing action

Model 2-300 |
Model 1-300 |
|

 |
MODEL 2-300 ENDOVER
ROTATOR
Rotates 2 drums simultaneously |


|
MODEL 1-300 ENDOVER
ROTATOR
Rotates 1 drum
Mix in closed shipping drums
Save time, labor and money
Eliminate transfer, clean-up, special
vessels and apparatus
End-over-end tumbling action does a thorough
mixing job
Mix dry powders and wet grains, dyes and
coloring liquids, fine and coarse granules, settled liquids and powders
Ideal for mixing highly viscous substances
inside closed drums
Put valuable ingredients back into
suspension
Less residue left in drums, making them less
costly to clean or dispose of
Sturdy frame is built to resist the stress
and shock of tumbling load
Standard motor is 1 HP 230V 3-Phase
Standard electric control includes start,
stop and jog functions
Other motor voltages, explosion proof
motors, and air motors available
Drum speed: 13 rpm
Capacity: 800 Lb. (363 kg) gross load in
standard 55 gallon (210 litre) drum
Base dimensions: 30" x 56" (76 cm
x 142 cm)
Shipping weight: 600 Lb. (272 kg)
|

|
OPTIONAL EQUIPMENT:
Loading crane for self-contained loading capability
|

Model 1-305 |
MODEL 305 SERIES
CAN TUMBLERS
Mix or Tumble small batches quickly and economically
Mix inside closed 5 gallon cans, one or two
at a time, without special added equipment
Cans are held at angle to the horizontal
rotating shaft resulting in "corner-over-corner" mixing action
Accepts cans up to 12-½" (31 cm)
diameter
4-1/2 to 16-½" (12-42 cm) tall,
including typical 5 gallon cans
Mix, blend, agitate liquid or dry materials
or tumble parts with media for polishing or deburring
Keeping the lid in place while agitating can
reduce hazards and save clean-up
When materials to be agitated are already
packed in cans, savings can be exceptional

Hand wheel and threaded rod with locking
handle provide quick, secure clamping action holding can closed and in place during
rotation
Tumbling speed factory set at 23 RPM
Motor is 1/4 HP in a choice of voltages,
phases, TEFC or explosion proof
Air motors are also available
Single phase, 115V TEFC version (2-305-1, or
1-305-1) includes 60 minute timers for automatic shut-off
Timers are NOT available for other motor
options
|
 |
MODEL 2-305 TUMBLES
TWO FIVE GALLON CANS
|
|
Install Morse Rotators in accordance
with OSHA requirements for enclosure and interlock, etc. For OSHA compliance, see OSHA
subpart O.1910.212 "General Requirements for all Machines." Power connections
and motor controls must comply with applicable codes. |
Back
Request More Info

|