Drum Dumper on Wheels to Lift, Move and Pour Drum
Morse Mfg. 400 Series Hydra-Lift Drum Karriers

More than just a 55 gallon drum dumper...

...controlled dispensing of your drum

Modern material handling requires ergonomic mobile drum handling equipment  to lift drum, then move, rotate and control pouring. We need to dispense a 55 gallon plastic drum, and fiber drum, in addition to the standard 55 gallon steel drum. Morse hydraulic lifting equipment enables safe material handling in heavy drum.

400 Series Hydra-Lift Drum Karrier combines incredible strength with simple drum handling by one person

 

  • Lift, move, tilt, raise and drain heavy 55 gallon steel drum

  • AC, Air and 12V DC Powered hydraulic lifting equipment with powered tilt available (see power options below)

  • Handle drum with drum faucet in place

  • All steel welded frame drum handler

  • Rolls on two 8" wheels & two 4" swivel casters

  • Available with 60", 72", 84" and 96" maximum pouring heights

  • Other models and features available

  • 400Am Series with Spark Resistant Parts

  • Drum holders for 55 gallon plastic drum

  • Adaptors and strap for fiber drum

  • Stainless steel versions available

  • Custom versions can be made for special height, reach, off size containers, special straddle width etc.

  • Use as a drum lifter, drum tumbler and drum rotator for material handling safely

                    Parts Diagram.jpg (2969 bytes)

     

CAPACITY of 400 Series Hydra-Lift Karriers

60", 72" 84" Lift Models

  • 800 Lb. (363kg) Full Drum

  • 500 Lb. (227kg) Half full drum

 

 

 96" Lift Models

  • 750 Lb. (340kg) Full drum

  • 375 Lb. (170kg) Half full drum

 

 
MANUAL LIFT AND TILT HYDRA-LIFT KARRIERS
Hand Pump Lift with Hand Crank or Pull-Chain Tilt

  • Model 400A-60

  • Lift and pour at up to 60" dispensing height

  • Hand pump to raise drum

  • Simple hand crank for drum tilt control

  • 72", 84", 96" models have pull chain & wheel for manual tilt control

  • Model 400A-72 has 72" maximum dispensing height

  • Model 400A-84 has 84" maximum dispensing height

  • Model 400A-96 has 96" maximum dispensing height

 

 

 

 

 

 

 

 

 

 

 

 
ELECTRIC POWER HYDRA-LIFT KARRIERS
Option 110 is Electric Power-Lift and Power-Tilt

  • 115V AC motor powered hydraulic lift and tilt

  • Hand valve control to lift and lower drum

  • Second valve to control drum tilt function

Option 120 is Electric Power-Lift with Manual -Tilt

  • 115V AC motor powered hydraulic lift

  • Power lift makes drum handling easier and faster

  • Hand valve control to lift and lower drum

  • Plug, cord and a simple on-off switch are included

  • 72", 84, 96" models have pull chain & wheel manual tilt control

  • 60" models have simple hand crank tilt control

  • Existing manual lift models can be converted to power lift

  • Order #O-120FI power lift option for "Field Installation"

 
Air Power Hydra-Lift Karriers

Morse recommends air at 40 PSI flowing at a rate of 40 CFM (cubic feet per minute)

Van type air motor

Air Motor
Technical Info

Filter, regulator, lubricator and valve are available at extra cost.

 

 

  

Option 114 is Air Motor Power-Lift and Power-Tilt

  • Air motor powered hydraulic lift and tilt

  • Hand valve control to lift and lower drum

  • Second valve for controlling hydraulically driven drum tilt.

Option 124 is Air Motor Power-Lift with Manual-Tilt

  • Air motor powered hydraulic lift

  • Hand valve control to lift

  • 72", 84, 96" models have pull chain & wheel manual tilt control

  • 60" models have simple hand crank tilt control

  • Existing manual lift models can be converted to power lift

 

 

Battery Power Hydra-Lift

Karriers

Model 400A-96-115

Shown at top

 

 Option 115 is Battery Power-Lift and Power-Tilt

  • Battery powerred hydraulic lift and tilt

  • Second valve for controling hydraulically powered drum tilt

Option 125 is Battery powered-Lift with Manual-Tilt

  • 12V Deep cycle battery provides self contained power

  • Charger included for wall or shelf mount

  • Hand valve control to lift

  • 72", 84, 96" models have pull chain & wheel manual tilt control

  • 60" models have simple hand crank tilt control

  • Existing manual lift models can be converted to power lift

 
Manual Tilt Control Options
 

  1. Standard Chain wheel and pull chain

  2. Hand Crank Options in place of wheel chain

  • Option # X01 - Hand crank, MORStop Tilt-Brake and Gear covers

  • Option # X02 - Hand crank and Gear Covers

  • Option # X03 - Hand wheel and Gear Covers

 
Converting Standard Hydra Lift Drum Carrier for use with Plastic Drum
  Ensure Safe Material handling with

  • HDPS Bracket to handle any 55 gallon plastic drum or 55 gallon steel drum

  • Top Rim Clamp to handle rimmed 55 gallon plastic drum or 55 gallon steel drum

  • Order as original drum holder or order for field conversion of standard unit

HDPS Bracket
with bracket at top and bottom

to handle any 55 gallon plastic

drum or steel drum

 

For plastic drum WITHOUT a top rim,

the Bracket Assembly, APS or HDPS

bracket is used

 

Top Rim Clamp
to handle rimmed 55 gallon

plastic drum or steel drum

 

For plastic drum WITH suitable top rim,

the Top Rim Clamp Assembly is used

 

 

 

 
Half-Full Drum Rating
  Half-Full rating is an indication of capacity for tilting unbalanced, bottom-heavy drum. Partially full drum with unbalanced and shifting load is harder to tilt than full drum

Back

Request More InfoEnvelope.gif (4196 bytes)

Thank you.jpg (25178 bytes)